Our products
Request an Appointment
The rotary joints represent a fundamental component in power and signal transmission for rotary machine. The possible use of these products is vast both for the type of application required and for the areas where their use is required.
For this reason the range of models that can be made is practically infinite, and depend on technical requirements, such as the type of transmission required or the degree of protection, and dimensional parameters. The SAE Group Srl range of rotary joints has more than 400 different models, divided into different versions according to the diameter; each one of them can be modify depending on customer requests and specifications.
Below we propose some models of rotary joints that are part of our production
Rotary joint PR80
Rotary joint Øest. 85mm, slipring: Ø35mm, 2÷16 bronze rings/silver rings per signal, isolated brush holers, IP65
Download Datasheet
Rotary joint PR80 for Flowpack machine
Rotary joint Øest. 85mm, slipring: Ø35mm, 2÷5 bronze rings/silver rings for signal, isolated brush holders, IP65, inox
Download Datasheet
Rotary joint PR110
Rotary joint Øest. 110mm, slipring: Ø52mm, 1÷8 bronze rings/silver rings for signal, isolated oscillating brush holders, IP54/IP65
Download Datasheet
Rotary joint PR130
Rotary joint Øest. 130mm, slipring: Ø52mm, 1÷15 bronze rings/silver rings for signal, isolated oscillating brush holders, IP54/IP65
Download Datasheet
Rotary joint PR160 IP54
Rotary joint Øest. 160mm, slipring: Ø52/70mm, 1÷18 bronze rings/silver rings for signal, isolated oscillating brush holders, IP54
Download Datasheet
Rotary joint PR160 IP65
Rotary joint Øest. 160mm, slipring: Ø52/70mm, 1÷18 bronze rings/silver rings for signal, isolated oscillating brush holders, IP65 oring
Download Datasheet
Rotary joint PR170 inox IP65
Rotary joint Øest. 160mm, slipring: Ø52/70mm, 1÷30 bronze rings/silver rings for signal, isolated oscillating brush holders, IP65 oring, inox
Download Datasheet
Rotary joint for ATEX
Rotary joint Øest. 110mm, slipring: Ø35mm, 1÷15 bronze rings/silver rings for signal, isolated oscillating brush holders, ATEX legislation zone 21/22
Download Datasheet
Rotary joint for label machine
Rotary joint Øest. 160mm, slipring: Ø52m, 1÷30 bronze rings/silver rings for signal (Profibus/CanOPEN), isolated oscillating brush holders, IP65
Download Datasheet
Rotary joint for filling and bottling machine
Rotary joint Øest. 170mm, slipring: Ø52m, 1÷30 bronze rings/silver rings for signal (Profibus/CanOPEN), isolated oscillating brush holders, IP65 inox
Download Datasheet
Inox rotary joint with fluidic transmission for label machine
Rotary joint Øest. 170mm, slipring: Ø52m, 1÷30 bronze rings/silver rings for signal (Profibus/DeviceNET), isolated oscillating brush holders, IP65 inox, 2 ways fluidic joint
Download Datasheet
Rotary joint PR230 with/without fluidic joint
Rotary joint Øest. 230mm, slipring: Ø90mm, 1÷48 bronze rings/silvered rings for signal, isolated oscillating brush holders, IP54, 2 ways fluidic joint
Download Datasheet
Rotary joint PR300 with/without fluidic joint
Rotary joint Øest. 300mm, slipring: Ø90/120mm, 1÷54 bronze rings/silvered rings for signal, isolated and brass brush holders, IP54/IP65, 24 ways fluidic joint
Download Datasheet
Carpentry rotary joint
Squared rotary joint 450x450mm, slip ring: Ø130-200mm, 1÷12 bronze rings, power up to 600A, brass brush holders, IP65
Download Datasheet
Are you interested in our products?
For any information about our products, features or the price of the products in the catalog, do not hesitate to contact the company S.A.E. Group srl: send your request and you will receive a reply as soon as possible.